Expansion to Existing Factory Premises

New_Project

◄ Back
Picture 1 of 1

Project Information

Project: Expansion to Existing Factory Premises.
Area:About to Start Concept Electronics and Engineering
Commencement: About to Start
Location: Near Nashik City

Project Brief

  • This project is a proposed expansion of Shop Floor in an existing premises for a typical manufacturing Industrial House.
  • The Building consists of Basement, Lower Ground and Ground Floor with huge capacity cranes upto 60 Tonnes.
  • The floor load considered is 3.5 Tonnes/Sqmt with Fork Lift Movement on the
    Concrete Floor.
  • The Building is a combination of RCC and Steel Structure.
  • For Interior View-
    1. https://kuula.co/share/Ns490?logo=1&info=1&fs=1&vr=0&sd=1&thumbs=1

Location: Nashik

 

Burckhardt Compression

BURCKHARDT-COMPRESSION

◄ Back
Picture 1 of 3

Project Information

Project: Refurbishment of Existing Shed
Owner: Burckhardt Compression (I) Pvt. Ltd.
Location: Ranoli GIDC, Vadodara, Gujrat

Project Brief

  • The client had a rented shed around 20km from the main city of Vadodara, Gujrat.
  • The objective of the shed is to serve as Service Centre to cater to the customer in the region.
  • The scope of work included the Interior Designing of the space on Mezzanine and designing of the toilet block adjoining to the main structure.
  • The shaft wall with Gyproc board was constructed along the mezzanine floor.

Location: Vadodara

 

Concept Electrical

CONCEPT ELECTRICAL

◄ Back
Picture 1 of 2

Project Information

Project: Facade Design for Factory Building
Owner: Concept Electronics and Engineering
Commencement: May 2016
Location: Pirangut, Tal. Mulshi, Dist.Pune

Project Brief

  • The Site is Located at 30Kms from Pune in an Industrial Area of Pirangut.
  • The production of the Factory is to produce Electronic Components.
  • The scope of work was to design a Facade to suit the character of the Industry.
  • The ACP Cladding is proposed for the Chhajja's and the Entrance and Staircase Block was highlighted out with ACP Cladding.
  • The focal points are treated with ACP so as to give a good visual effect while approaching the Factory.

Location: Pune

 

Genie Auto Products

GENIE-AUTO-PRODUCTS

◄ Back
Picture 1 of 3

Project Information

Project: Genie Auto Products Pvt. Ltd.
Commencement: August 2017
Area: Approx. 30000.00 Sft.
Location: MIDC Chakan, Phase II, Pune

Project Brief

  • This project is a Press Metal Components Factory Building for Genie Auto products which is a more than 25 years old establishment.
  • The building consists of around 20000.00 Sft of Manufacturing Area and 10000.00 Sft Administrative Office.
  • The façade is Galvalume Sheeting for Manufacturing Unit and Structural Glazing for Office Area part.
  • The scope of work includes Architectural and Interior Design Services.

Location: Pune

 

Jendamark Technologies Pvt. Ltd.

JENDAMARK TECHNOLOGIES

◄ Back
Picture 3 of 4

Project Information

Project: Jendamark Technologies Pvt. Ltd.
Commencement: June 2017
Area: Approx. 18500.00 Sft.
Location: Khed Shivapur, Pune

Project Brief

  • This project is an Engineering Unit for Jendamark Technologies which has a collaboration with South African Industrial House.
  • The building consists of around 13000.00 Sft of Manufacturing Area and 5500.00 Sft Administrative Office.
  • The scope of work includes Architectural Design Services.

Location: Pune

 

Sapat Tea Company

SAPAT TEA COMPANY

◄ Back
Picture 1 of 2

Project Information

Project: Factory Building &Warehouse
Owner: M/s J.R.Ventures
Commencement: Aug. 2007
Area: App.40000.00 Sft.
Location: Mumbai-Agra Highway, Jaulke, Nashik

Project Brief

  • The Site is Located at @ 15.00 Kms away from Nashik on National Highway.
  • The Objective of the Factory is to have a Food Products for the Company & on the back side, there is Ware House for goods storage.
  • The Alicomate cladding is provided for the front building so as to give it a Showroom look as it can be used as Factory Outlet in future.
  • The offsets are provided for the Warehouse due to angular Plot Boundary which in turn facilitates the easier Truck movement & parking which is the essential part of any Ware House.

Location: Nashik

 

WOM SEZ

WOM

◄ Back
Picture 1 of 1

Project Information

Project: WOM SEZ
Commencement: Under Design Development
Area: Approx 125 Acres
Location: Near Bhor, Pune

Project Brief

  • The Client purchased a land of around 125 Acres on a hilly area near Bhor, Pune.
  • The Client’s wish is to set up an SEZ on that land.
  • The challenge in Master planning is to have minimum cutting and filling so avoid soil erosion.
  • The Master Planning is done in keeping in view the requirements of SEZ bye-laws.
  • The Buildings with Machine Foundations are positioned where the contours have a drop so as to get the advantage of the land profile.
  • The Amenity Space is so positioned as to have the use of natural water storage formed in that area which can be used for Rain Water Harvesting and to re-use the accumulated water.

Location: Bhor (Pune)

DG Corporation Pvt. Ltd.

Perspective

◄ Back
Picture 1 of 2

Project Information

Project: Factory Shed for DG Corporation Pvt. Ltd.
Commencement: Under Progress.
Area: Approx. 25000.00 Sft.
Location: MIDC Satpur, Pune

Project Brief

  • This project is a Press Metal Components Factory Building for DG Corporation which is a more than 10 years old establishment.
  • The building consist of around 25000.00 Sft of Manufacturing Area 

Location :MIDC Satpur, Pune

<

DOW Chemicals International

DOW CHEMICALS INTERNATIONAL

◄ Back
Picture 1 of 1

Project Information

Project: Renovation an d Interior Work for
Office Building
Owner: DOW Chemicals International
Commencement: Aug. 2017
Area: App.15000.00 Sft.
Location: Lote MIDC, Tal Chiplun, Dist. Ratnagiri

Project Brief

  • The Client wished to extend the existing office building and to the add the Lab and Office Area to the same.
  • The existing RCC Building with the 35-year-old elevation is refurbished with the state of the art elevation to make it a new styled corporate building.
  • The Alicomate cladding and Structural Glazing is provided for the front building.

Location: Chiplun, Ratnagiri

Invivo India Pvt. Ltd.

Invivo India Pvt. Ltd.

◄ Back
Picture 1 of 1

Project Information

Project: Invivo India Pvt. Ltd.
Commencement: Yet to commence
Area: Approx. 75000.00 Sft
Location: Near Mumbai

Project Brief

  • The Site is Located near Mumbai in an Industrial Area MIDC.
  • The production of the Factory is Poultry Food.
  • The scope of work was to design the total campus including all buildings.
  • The total proposed area is @ 7000.00 Sqmt.
  • The Master planning is done taking into consideration the Manufacturing process along with the material movement and future expansion.

Location:Mumbai

DS Cables and Switchgears

DS Cables and Switchgears

◄ Back
Picture 1 of 1

Project Information

Project: Factory Shed for M/s DS Cables and Switchgears
Commencement:  Oct 2023
Area : Approx. 4000.00 Sft.
Location:   MIDC Ambad, Nashik.

Project Brief

  • This project is a Building for Cables and Switchgear Trader to cater his storage and product display showroom.
  • The location of this building is prime in Ambad Industrial Area.

Location: Nashik